# Parameter Editing Module

 **The right side of this page is \[Parameter Editing Module]**

### **1）Recording Parameters**

* After completing the parameter configuration, all parameters will be displayed here. 
* It is used to adjust the corresponding value of the parameter in the current version. 
* Notes: After the recording is completed, you can directly change the parameter value to output the other versions instead of re-recording.

<figure><img src="/files/72x47K7vi3STNUwednvz" alt=""><figcaption></figcaption></figure>

### **2）Video Design**

* Set the cursor tracking
* Upload and adjust the cursor image

<figure><img src="/files/u8mDOAdrdfZs4mrbSMYf" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://doc.playturbo.com/screen-recording-tool-screen-recorder/3.-recording-functions-introduction/parameter-editing-module.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.